Heat shrink tubing with an adhesive layer and a shrinkage ratio of 6:1
Type: TT-(6Kh) (TU 2247-021-97284872-2006)
- Designed for sealing, insulation, and corrosion protection of contact joints in the electric power and telecommunication industries
- Shrinkage ratio: 6:1.
- Three times greater shrinkage ratio than that of standard tubes
- Material: Polyolefin
- Color: Black
- A layer of hot melt glue is applied to the entire inner surface of the shrink tubing by co-extrusion
- The heat shrink tubing is resistant to UV radiation and weather, environmental, and climatic factors
- During shrinkage, the adhesive layer melts down, fills all irregularities of the surface, and completely seals the joints
- Ultra-wide shrinkage range guarantees insulation, and leak tightness of complex products with great irregularities.
- Delivery package: 1.22 m cut
- Installation tools: PG propane burner (KVT)
|
Elongation at fracture |
not less than 350 % |
|
Shrinkage temperature |
120 °C |
|
Operating temperature |
-55 °C to +125 °C |
|
Tensile strength |
not less than 10 MPa |
|
Dielectric strength |
not less than 18 kV/mm |
|
Operating voltage |
up to 1000 V |
|
Volumetric resistivity |
1014 ohm*cm |
|
commodity items, color |
Optimal shrinkage range (mm) |
delivery package |
adhesive layer |
Dimensions (mm) |
min. quantity for release |
cost unit |
||
|
D (not less than) |
d (not more than) |
T (after shrinkage) |
||||||
|
TT-(6Kh)-19/3.2(KVT) |
17-3.8 |
cut: 1.22 m |
hot melt |
19 |
3.2 |
3.2 |
5 |
pc |
|
TT-(6Kh)-33/5.5(KVT) |
29.7-6.6 |
cut: 1.22 m |
hot melt |
33 |
5.5 |
3.4 |
5 |
pc |
|
TT-(6Kh)-50.8/8.3(KVT) Min. quantity for release: 5 pcs product code: 65754 |
45.7-10 |
cut: 1.22 m |
hot melt |
50.8 |
8.3 |
4.3 |
5 |
pc |
|
TT-(6Kh)-69.8/11.7(KVT) |
62.8-14 |
cut: 1.22 m |
hot melt |
69.8 |
11.7 |
4.8 |
5 |
pc |
|
TT-(6Kh)-88.9/17.1(KVT) |
79-20.5 |
cut: 1.22 m |
hot melt |
87.5 |
17.1 |
4.8 |
5 |
pc |
|
TT-(6Kh)-119.4/22.9(KVT) |
107.5-27.5 |
cut: 1.22 m |
hot melt |
119.4 |
22.9 |
4.8 |
5 |
pc |
