Connecting cable joint kits


Type: 3STpU-10

 

  • Designed for connecting 3-core cables:
    • with oil-impregnated paper insulation
    • w/ or w/o armouring
    • with common aluminum or lead sheath
    • rated for 6 and 10 kV
  • Conforms to the requirements of GOST 13781.0-86
  • Types of installed cables:
    AABl, (A)SBl, (A)SKl, (A)SBG, AAG, (A)SG, AABv, (A)SBShV, AAShV, (A)SShV, AAB2lShV, (A)SB2lShV
  • The thick-walled insulating cable guards installed at the point of termination of cable cores are made of special brick-red material with increased dielectric breakdown strength. The thick-walled cable guards with an inner hot-melt layer ensure reliable insulation and sealing of the cable core joints
  • Special mastic used to fill the space between phases prevents formation of air voids inside the cable joint and creates an additional sealing contour
  • The use of special-purpose oil-resistant sealant ensures sealing of the cable stripping point and electric field equalization
  • The jumper wire connecting the sheaths and armouring tape at both ends of the cable is installed using the combined installation technique. The basic configuration includes a constant-force springs used to attach the ground wires to the metal sheaths. The connector is mounted on the armouring tape by soldering
  • When mounting ground nodes on cables armoured with steel or aluminum, use ground kits classified for the selected cable joint.
  • The constant-force spring ensures fast and reliable installation of the ground wire on the metal sheaths. The spring prevents thermal damage to the paper insulation under the aluminum sheath in the case of soldering with class “A” brazing solder
  • The use of two protective heatshrink enclosures (internal and external) and inter-phase sealant-fillers ensure complete sealing of the assembly
  • The cable joint kit is universal and allows you to use both crimping cord end terminal and bolted connectors
  • Installation tools: PG propane burner, NMB-6 tool kit for snapping sheer bolt heads and installation of shear bolt connectors, cable stripping tool kit 
  • Manufactured as per Technical Requirements TU 3599-001-34461190-2007

 

 

Additional information

commodity items

cross-sectional area range (mm2)

installation type

cable type

bolt incl. in the set

min. quantity for release

cost unit

 
 

3STpU-10-16/25 

16-25

ind. + outd.

w/o armouring

yes

1

pc

 

3STpU-10-35/50 

35-50

ind. + outd.

w/o armouring

yes

1

pc

 

3STpU-10-70/120

70-120

ind. + outd.

w/o armouring

yes

1

pc

 

3STpU-10-150/240

150-240

ind. + outd.

w/o armouring

yes

1

pc