Type: 1PKNT-10

• Designed for terminating single-core cables:
• with cross-linked polyethylene insulation by means of a copper or aluminum wire shield
• rated for 6 and 10 kV
• Conforms to the requirements of GOST 13781.0-86
• Types of installed cables:
  (A)PvP, (A)PvV, (A)PvBP, (A)PvBV, (A)PvPu, (A)PvPg, (A)PvPug, (A)PvP2g, (A)PvPu2g
• Presence of a stress-grading tube ensures reliable operation of high-voltage cable joints and even electric field equalization across the cross-sectional area of the semiconductor shield
• The nontracking tube material is resistant to tracking, UV radiation, and environmental factors
• The cable joint is equipped with a cable core isolator that increases the leakage current distance and creates a dry zone on the cable joint surface
• Application of hot-melt adhesive onto the inner surface of the nontracking tube and tapping of the wire shield stripping point with sealing tape ensure complete tightness of the cable joint after installation
• The ground conductor is formed using the copper wire shield of the cable and is terminated with a crimp lug. The ground conductor crimp lug is not included in the cable joint kit
• When mounting ground nodes on cables armoured with steel or aluminum, use a KMBP ground kit classified for the selected cable joint.
• The cable joint kit is universal and can be used both with crimping and bolt lugs
• The package content is sufficient for installation of three cable phases
• Note: 1PKNT-10-800(B) cable joints are designed for installation only on cables with aluminum conductive cores
• Installation tools: PG propane burner, NMB-6 tool kit for snapping sheer bolt heads and installation of shear bolt connectors, cable stripping tool kit
• Manufactured as per Technical Requirements TU 3599-005-97284872-2015

Additional information